0
2010 Design of Medical Devices Conference Abstracts

Emergency Cardiac Anterolateral Thoracotomy Simulator OPEN ACCESS

[+] Author and Article Information
Wajiha Shahid, Ofra Rybak, Josh Rollins, Carly Schiffer, Kathleen H. Sienko, Pamela Andreatta

University of Michigan

J. Med. Devices 4(2), 027532 (Aug 11, 2010) (1 page) doi:10.1115/1.3443739 History: Published August 11, 2010

Abstract

Trauma is the leading cause of death in persons younger than 44 years old in America; half of the deaths occur within the first hour following the incident. The likelihood of survival for such critical trauma patients is significantly increased if an Emergency Department Thoracotomy (EDT) is performed. EDT entails the surgeon performing large and rapid incisions into the pleural space of the thoracic cavity to resuscitate patients who have suffered penetrating chest trauma. This procedure is highly invasive and rare and is typically conducted outside the operating theater in the absence of a trained cardiothoracic surgeon. Since most emergency clinicians are not trained to perform EDT and are often hesitant to perform it, poor outcomes are common. The use of clinical simulators offers the potential to eliminate these concerns; however, current medical simulators are not dedicated to the training of EDT. The goal of this work was to design and build a mechanical simulator to mimic the functionality of the rib cage and the components within the thoracic cavity to serve as a learning and assessment tool for conducting EDT. This design paper presents the user requirements and engineering specifications for the simulator, explains the materials selection approach employed for the thoracic components, and describes the iterative approach for designing, fabricating, and validating the EDT simulator.

Copyright © 2010 by American Society of Mechanical Engineers
This article is only available in the PDF format.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In