0
2011 Design of Medical Devices Conference Abstracts

Design of an Instrument Guide for MRI-Guided Percutaneous Interventions OPEN ACCESS

[+] Author and Article Information
Xuefeng Chen

Stanford University

Conor J. Walsh, Alexander Slocum

MIT

Kemal Tuncali

Brigham and Women’s Hospital

J. Med. Devices 5(2), 027527 (Jun 14, 2011) (1 page) doi:10.1115/1.3590861 History: Published June 14, 2011; Online June 14, 2011
FIGURES IN THIS ARTICLE

This paper describes the design of an instrument guidance device for percutaneous interventions in closed bore magnetic resonance (MR) imaging systems. The device consists of a curved arm piece that travels around a circular base and an additional needle holder that travels along the curved arm, thus providing two angular degrees of freedom that enable an ablation probe to pivot about a remote center of motion located at the skin entry point. The device is intended to be mounted onto a custom built MR coil that rests on the patient while they are imaged. Exact constraint design principles were used to incorporate translational bearings into the plastic parts. Thumbscrews were used for preload and locking so that the probe guide could be fixed along a specific trajectory. The device was prototyped via stereolithography as a proof of concept and demonstrated that a probe could be angled about a remote pivot point.

Copyright © 2011 by American Society of Mechanical Engineers
This article is only available in the PDF format.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In