2011 Design of Medical Devices Conference Abstracts

Task-Specific Multiple-Arm Minimally Invasive Surgical Device Design Using Cooperative Kinematic Isotropy Indices OPEN ACCESS

[+] Author and Article Information
Frank L. Hammond

Harvard University

J. Med. Devices 5(2), 027533 (Jun 14, 2011) (1 page) doi:10.1115/1.3590878 History: Published June 14, 2011; Online June 14, 2011

The transition from multiple-port to single-port robotic systems in minimally invasive surgery (MIS) procedures has made flexible, dexterous manipulation an essential capability. The requirement that single-port MIS devices span an enclosed surgical workspace through only one access point while avoiding collateral damage to surrounding tissues necessitates the employment of mechanically sophisticated, kinematically redundant device architectures. These redundant architectures, while capable of achieving clinically acceptable performance levels on complicated MIS procedures, are difficult to design and can easily result in economically prohibitive or technically impractical solutions. The problem of balancing clinical functionality and design economy in single-port MIS devices becomes even more challenging when the dexterous that uses multiple surgical tools is required for a given procedure. This research presents a design methodology aimed at reducing the number of degrees of freedom needed to achieve dexterous motion for a multiple-arm single-port MIS device. This design methodology exploits the availability of multiple manipulator arms by quantifying device dexterity in terms of cooperative manipulability, such that the dexterity of two or more nonredundant manipulator arms can be synergistically combined to achieve a high level of motion redundancy. This methodology, in theory, can be used to design multiple-arm MIS devices such that each arm is specialized for a particular type of motion, thus obviating the need for more versatile, redundant manipulator arms, which innately require higher DOFs and, by extension, demand greater mechanical sophistication and device cost. The concept of cooperative kinematic isotropy, an extension of prior work on weighted global isotropy indices, is developed as a multiple-arm MIS device fitness metric. This metric quantifies kinematic isotropy as the aggregate isotropy of two or more manipulator arms and allows the treatment surgical procedures as a task-specific, hybrid set of individual and cooperative manipulation tasks. The efficacy of cooperative kinematic isotropy is demonstrated on the design of a four-armed single-port MIS device designed for blood vessel anastomosis procedures that typically require such a hybrid set of manipulation tasks. Results show that cooperative kinematic isotropy is an effective means reducing MIS device complexity while maintaining adequate levels of kinematic dexterity for specific surgical procedures. The author concludes that this new design fitness metric, while heuristic in nature and based on several key design and simulation assumptions, holds the potential to improve both the clinical value and the economy of cutting-edge, multiple-armed single-port MIS systems.

Copyright © 2011 by American Society of Mechanical Engineers
This article is only available in the PDF format.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In