0
Frontiers Abstracts

Stochastic Simulation of Modular Connections in Total Hip Replacement

[+] Author and Article Information
Finn E. Donaldson

e-mail: Finn.Donaldson@fda.hhs.gov

James C. Coburn

e-mail: James.Coburn@fda.hhs.gov
Division of Physics,
Office of Science and Engineering Laboratories,
Center for Devices and Radiological Health,
and Office of Medical Products and Tobacco,
U.S. Food and Drug Administration,
Silver Spring, MD 20993

Manuscript received September 20, 2013; final manuscript received September 25, 2013; published online December 5, 2013. Editor: Gerald E. Miller.

J. Med. Devices 7(4), 040905 (Dec 05, 2013) (1 page) Paper No: MED-13-1216; doi: 10.1115/1.4025785 History: Received September 20, 2013; Revised September 25, 2013

First Page Preview

View Large
First page PDF preview
FIGURES IN THIS ARTICLE
Copyright © 2013 by ASME
Your Session has timed out. Please sign back in to continue.

References

Langton, D., Sidaginamale, R., Lord, J. K., Nargol, A. V. F., and Joyce, T. J., 2012, “Taper Junction Failure in Large-Diameter Metal-on-Metal Bearings,” J. Bone Surg. Br., 1(4), pp. 56–63. [CrossRef]
Heiney, J., Battula, S., Vrabec, G. A., Parikh, A., Blice, R., Schoenfeld, A. J., and Njus, G. O., 2009, “Impact Magnitudes Applied by Surgeons and Their Importance When Applying the Femoral Head Onto the Morse Taper for Total Hip Arthroplasty,” Arch. Orthop. Trauma Surg., 129(6), pp. 793–796. [CrossRef] [PubMed]
Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J., and Duda, G. N., 2001, “Hip Contact Forces and Gait Patterns From Routine Activities,” J. Biomech., 34(7), pp. 859–871. [CrossRef] [PubMed]
Coburn, J., Donaldson, F., and Siegel, K., 2012, “Example Method for Validation of FEA to Inform Medical Device Design and Bench Test Optimization,” Proc. NAFEMS North America Conference’12, Washington, DC, September 11–12.
Shareef, N., and Levine, D., 1996, “Effect of Manufacturing Tolerances on the Micromotion at the Morse Taper Interface in Modular Hip Implants Using the Finite Element Technique,” Biomater., 17(6), pp. 623–630. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Definition of model parameters and trunnion-taper mesh

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In