0
Special Section Technical Briefs

Detection Device for Dental Implant Osseointegration Using Inductors and Hall Sensors1

[+] Author and Article Information
Ru-Zhen Mou

Department of Mechanical Engineering,
National Central University,
Taoyuan City 320,Taiwan

Shiou-Bair Lin

Graduate Institute of Biomedical Engineering,
National Central University,
Taoyuan City 320, Taiwan

Chin-Sung Chen

Department of Dentistry,
Sijhih Cathy General Hospital,
New Taipei City 221, Taiwan

Min-Chun Pan

Department of Mechanical Engineering/
Graduate Institute of Biomedical Engineering,
National Central University,
Taoyuan City 320, Taiwan
e-mail: pan_minc@cc.ncu.edu.tw

Accepted and presented at The Design of Medical Devices Conference (DMD2015), April 13-16, 2015, Minneapolis, MN, USA.

Manuscript received March 3, 2015; final manuscript received March 23, 2015; published online April 24, 2015. Editor: Arthur Erdman.

J. Med. Devices 9(2), 020937 (Jun 01, 2015) (3 pages) Paper No: MED-15-1130; doi: 10.1115/1.4030193 History: Received March 03, 2015; Revised March 23, 2015; Online April 24, 2015

First Page Preview

View Large
First page PDF preview
FIGURES IN THIS ARTICLE
Copyright © 2015 by ASME
Your Session has timed out. Please sign back in to continue.

References

Gapski, R., Wang, H. L., Mascarenhas, P., and Lang, N. P., 2003, “Critical Review of Immediate Implant Loading,” Clin. Oral Implants Res., 14(5), pp. 515–527. [CrossRef] [PubMed]
Vanden Bogaerde, L., 2004, “A Proposal for the Classification of Bony Defects Adjacent to Dental Implants,” Int. J. Periodontics Restor. Dent., 24(3), pp. 264–271. 10.11607/prd.00.0585
Sunden, S., Gröndahl, K., and Gröndahl, H. G., 1995, “Accuracy and Precision in the Radiographic Diagnosis of Clinical Instability in Brånemark Dental Implants,” Clin. Oral Implants Res., 6(4), pp. 220–226. [CrossRef] [PubMed]
Schulte, W., Hoedt, B. D., Lukas, D., Muhlbradt, L., Scholz, F., Bretschi, J., Gudat, H., Konig, M., and Markl, M., 1983, “Periotest—A New Measurement Process for Periodontal Function,” Zahnarztliche Mitt., 73(11), pp. 1229–1240.
Meredith, N., Alleyne, D., and Cawley, P., 1996, “Quantitative Determination of the Stability of the Implant–Tissue Interface Using Resonance Frequency Analysis,” Clin. Oral Implants Res., 7(3), pp. 261–267. [CrossRef] [PubMed]
Meredith, N., Books, K., Fribergs, B., Jemt, T., and Sennerby, L., 1997, “Resonance Frequency Measurements of Implant Stability In Viva. A Cross-Sectional and Longitudinal Study of Resonance Frequency Measurements on Implants in the Edentulous and Partially Dentate Maxilla,” Clin. Oral Implants Res., 8(3), pp. 226–233. [CrossRef] [PubMed]
Ito, Y., Sato, D., Yoneda, S., Ito, D., Kondo, H., and Kasugai, S., 2008, “Relevance of Resonance Frequency Analysis to Evaluate Dental Implant Stability: Simulation and Histomorphometrical Animal Experiments,” Clin. Oral Implants Res., 19(1), pp. 9–14. [CrossRef] [PubMed]
Pan, M.-C., Zhuang, H. B., Chen, C.-S., Wu, J.-W., and Lee, S.-Y., 2013, “A Noncontact Resonance Frequency Detection Technique for the Interfacial Bone Defect Assessment Around the Dental Implant,” Med. Eng. Phys., 35(10), pp. 1825–1830. [CrossRef] [PubMed]
Chia, T. S., Chen, C.-S., and Pan, M.-C., 2014, “Assessment of Dental Implantation Osseointegration Through Electromagnetic Actuation and Detection,” ASME J. Med. Devices, 8(3), p. 030940. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Schematic of mechanism illustrating detection device for the measurement of dental implant structure resonance

Grahic Jump Location
Fig. 2

Chirp-like ascending waveform using Morlet wavelets for the actuation of dental osseointegration detection device. (a) One complete cycle of actuation waveform composed of 30 chirps, (b) the zoom-in waveform of one chirp, (c) corresponding spectrum of (a), and (d) characterized spectrogram of actuation waveform.

Grahic Jump Location
Fig. 3

(a) Experimental setup for measuring implant–bone structural resonance. A magnetic pole was used to generate induced vibration, where in (b) a capacitive displacement sensor is used to measure structural vibration for a comparison, and four arrows indicate two sets of inductor exciters (lower) and Hall sensors (upper), respectively.

Grahic Jump Location
Fig. 4

Dental implants in artificial bone blocks to simulate the osseointegration of dental implant–alveolar bone structure with varied Young’s modulus and thickness of cortical bone

Grahic Jump Location
Fig. 5

Frequency spectra to characterize dental implant–bone block structural resonance. The upper and lower charts of (a) 1-mm and (b) 2-mm cortical shell are using the capacitive displacement sensor and the proposed EM device, respectively, where three curves in each chart result from varied excitation through Osstell, Morlet chirps, and swept sinusoids.

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In